Using The [Binding Change] Key - Sharp MX-M1100 User Manual

Exposure
Auto
4
Copy Ratio
100%
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
5
• Up to 9999 copies (sets) can be set.
• If you are only making a single copy, the copy can be made with the copy number display showing "0".
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [START] key (
6
To cancel scanning of the original and copying...
Press the [STOP] key (

Using the [Binding Change] key

Originals
A
1
Plain
Plain
Plain
8½x11
5.
11x17
1. 2. 6.
8½x11 8½x11 11x17
3. 11x17 7.
4. 8½x14 11x17
Original Paper Select
Auto
Auto
8½x11
8½x11
Plain
Special Modes
Plain
2-Sided Copy
8½x11
5.
) and then enter the correct number.
).
).
Binding Change is used
2
Check the paper to be used.
Special Modes
Make sure that the desired paper (tray) is selected.
2-Sided Copy
To change the paper (tray), touch the [Paper Select] key.
☞
Output
PAPER TRAYS
File
Quick File
Set the number of copies (number of
7
sets) with the numeric keys.
The reverse side
A
is upside down.
Select this when
A
the pages will be
bound into a
tablet.
3
20
(page 14)
Binding Change is not used
The reverse side
A
is not upside
down.
Select this when
the pages will be
A
bound into a
booklet.