Using The [Binding Change] Key - Sharp MX-C402SC Operation Manual

Color Mode
Full Color
Exposure
Auto
6
Copy Ratio Original
100%
Upper Exit
For some original size settings, the same size of paper as the original may not be automatically selected. In this case,
manually change the paper size.
7
• Up to 999 copies (sets) can be set.
• If you are only making a single copy, the copy can be made with the copy number display showing "0".
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [COLOR START] key or the [BLACK & WHITE START] key.
8
To cancel scanning of the original and copying...
Press the [STOP] key (

Using the [Binding Change] key

Originals
A
1
Special Modes
2-Sided Copy
Plain
8½x11
Output
8½x11
1.
5½x8½
2. File
8½x14
3.
8½x11
4.
Quick File
Paper Select
Auto
8½x11
8½x11 8½x11
Preview
Plain
Special Modes
2-Sided Copy
Plain
8½ 11
) and then enter the correct number.
).
Binding Change is used
A
A
2
3
Check the paper to be used and the
color mode.
Make sure that the desired paper (tray) and color mode are
selected.
• To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS
• To change the color mode, touch the [Color Mode] key.
☞
COLOR COPY MODES
Set the number of copies (number of
7
sets) with the numeric keys.
The reverse side
is upside down.
Select this when
the pages will be
bound into a
tablet.
2-18
COPIER
(page 2-10)
(page 2-22)
Binding Change is not used
The reverse side
A
is not upside
down.
Select this when
the pages will be
A
bound into a
booklet.
Contents