Using The [Binding Change] Key - Sharp MXC301W Operation Manual

Color Mode
Full Color
Exposure
Auto
4
Copy Ratio Original
100%
5
Up to 999 copies (sets) can be set.
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [COLOR START] key or the [BLACK & WHITE START] key.
6
To cancel scanning of the original and copying...
Press the [STOP] key (

Using the [Binding Change] key

Originals
A
1
Special Modes
2-Sided Copy
Plain Output
8½x11
File
8½x11
8½x11
Quick File
Paper Select
Auto
8½x11
8½x11
Preview
Plain
Special Modes
2-Sided Copy
Plain
8½x11
) and then enter the correct number.
).
Binding Change is used
A
A
2
3
Check the paper to be used and the
color mode.
Make sure that the desired paper (tray) and color mode are
selected.
• To change the original size, touch the [Original] key.
☞
ORIGINALS (page 2-9)
• To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS
• To change the color mode, touch the [Color Mode] key.
☞
COPY COLOR MODES
Set the number of copies (number of
7
sets) with the numeric keys.
The reverse side
is upside down.
Select this when
the pages will be
bound into a
tablet.
2-16
COPIER
(page 2-10)
(page 2-20)
Binding Change is not used
The reverse side
A is not upside
down.
Select this when
the pages will be
A
bound into a
booklet.
Contents