TrueNAC Voltage Drop Test,
T esting each
1 1 6 B
TrueAlert Power
Supply's SLC
T he TrueNAC Report
1 1 7 B
T rueNAC Report
1 1 8 B
Samples
Continued
6. Press the <ENTER> key on the Display/Action keypad. If the test is successful, the following
message displays.
TPS CARD: X Channel: X
TrueNAC TEST COMPLETED
_______________________________________________________________________________
A TrueNAC status report can be generated by the panel with the completion of the TrueNAC
Voltage Drop Test.
Sample reports are shown below.
Example of a successful single-channel test:
-----------------------------------------------------------------
Service Port
Report 6: TrueAlert Device Status Report 10:23:45am WED 07-FEB-07
-----------------------------------------------------------------
TPS
3
SLC
1
POINT ID
CUSTOM LABEL
--------- ---------------------------------------- --------------
3-1-1
Cafeteria East
3-1-2
Cafeteria West
3-1-3
Main Lobby
3-1-4
Library East
3-1-5
Library West
NOMINAL CURRENT (A):
WORST_CASE CURRENT (A):
WORST_CASE VOLTAGE ABOVE/BELOW THRESHOLD (V):
SLC HAS NOT PASSED UNLESS ALL DEVICES ARE MARKED AS PASSED
---------------------------------------------------------------
_______________________________________________________________________________
Page 1
TEST RESULT
PASSED
PASSED
PASSED
PASSED
PASSED
1.34
1.97
0.9
Continued on next page
54
Need help?
Do you have a question about the 4100ES and is the answer not in the manual?