User Install - Oki CX2731MFP Advance User Manual

Symptom
Print data is not
transmitted to the
MFP.
There is an
abnormal sound.
There is a buzzing
sound.
It takes a while to
start printing.
The print result
does not change
though you have
changed the
[Density] setting.
MC361/MC561/CX2731 MFP Advanced User's Guide
Cause
The Ethernet or USB
cable is broken.
The time-out period
set on the computer
has passed.
The MFP is inclined.
There is a piece of
paper or unknown
object inside the MFP.
The top cover is open.
The MFP is printing on
the heavy or thin
paper when the
temperature inside is
high.
The MFP is warming
up from the power
save or sleep mode.
The MFP may be
cleaning the image
drum unit.
The MFP is adjusting
the temperature of the
fuser unit.
The MFP is processing
a data from another
interface.
You have also changed
the [RGB] setting.
301
– Issues: MFP Issues
Remedy
Connect a new cable.
Set a longer time-out
period.
Place the MFP on a flat
surface.
Check the inside of the
MFP and remove any
objects.
Close the top cover.
This is not a malfunction.
You can proceed with the
operation.
Press the <SETTING> key
and select [Admin Setup]
> [User Install] > [Power
Save Enable]/[Sleep] and
disable both modes.
Wait for a while.
Wait for a while.
Wait until the process
finishes.
The [Density] setting is
automatically changed
according to the [RGB]
setting.
If the print result is not
what you expected,
change the [RGB] setting
again.