Continuous Flow Operation Page - Beckman Coulter Optima XE Series User Manual

Functional Pages

Continuous Flow Operation Page

Continuous Flow Operation Page
Figure 5.30 Continuous Flow Operation Page
The
Continuous Flow Operation
Button from the
Authorize
Continuous Flow mode.
When you use Continuous Flow mode, the
until Continuous Flow mode ends.
In addition to the Header Bar and the Footer Bar, the
following elements:
• The Status Display shows the current step in the Continuous Flow Run procedure. See
Continuous Flow Operation
• The
Loading Complete
• The
Unload
step.
• The Load Speed Display shows the sample loading speed. Use the arrow buttons above and
below to increase or decrease the sample loading speed.
• The
Vacuum
preconditioning the chamber at the beginning of a run, or to release the vacuum at the end of
a run.
• The Unload Speed Display shows the sample unloading speed. Use the arrow buttons above and
below to increase or decrease the sample unloading speed.
• The
Slow to Zero rpm
temporarily during the initial loading adjustments.
• The
Cancel
the
Home
Use the Footer Bar for setting the run speed, time, and temperature.
5-28
Page appears when you enter the correct password and select the
Continuous Flow Authorization
in the Operations
Button ends the sample loading step and proceeds to the running step.
Button terminates the running step early and proceeds to the sample unloading
Display/Button shows the current vacuum. Press it to begin evacuating and
Button is for preliminary steps which require bringing the rotor to a stop
Button ends Continuous Flow Mode before loading is complete and returns you to
Page.
Page, putting the instrument in
Continuous Flow Operation
Continuous Flow Operation
chapter for details.
Page replaces the Page
Home
Page contains the
Zonal and
PN B07711AA