Description; Introduction - IntesisBox IBBACMEB0100000 User Manual

BACnet Server – M-Bus
®
IntesisBox

1 Description

Introduction

This document describes the integration of M-Bus meters with BACnet ASHRAE 135 – 2001 Annex J - BACnet
protocol compatible devices or systems using the gateway IntesisBox BACnet/IP Server - M-Bus.
The aim of this integration is to make accessible M-Bus devices signals and resources from a BACnet based control
system or device, as if it was a part of the own BACnet system and vice-versa.
The gateway acts as a BACnet/IP Server or BACnet MSTP device in its BACnet interface, allowing other BACnet
devices to perform subscription (COV) requests and reads/writes to its internal points. From the M-Bus point of view,
IntesisBox acts as a M-Bus master device (EN-1434-3), the readings of the M-Bus slave device(s) is performed by
IntesisBox by automatic continuous polling.
IntesisBox incorporates and embeded M-Bus level converter, so no extra hardware is required.
Configuration is carried out using the configuration software IntesisBox
This document assumes that the user is familiar with BACnet and M-Bus technologies and their technical terms.
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
Ethernet TCP
BACnet/IP
BACnet MSTP
Integration of MBUS devices
to BACnet IP or MSTP control and monitoring systems
User Manual r1.0 eng
®
MAPS.
MBUS
URL http://www.intesisbox.com
email info@intesisbox.com
tel +34 938047134
6/41