Integration Of Intesisbox In Ets - IntesisBox KNX TP-1 (EIB) User Manual

®
IntesisBox BACnet/IP Server - KNX
®
6. IntesisBox
6.1 Integration of IntesisBox
As explained the IntesisBox
might be needed to integrate the gateway in the ETS project, for example to allow the line
couplers have a correct configuration of their filter tables. To do so a Dummy device can be
used in ETS to simulate the IntesisBox and associate also to this dummy device all group
addresses used in IntesisBox
In http://www.intesis.com/down/eib/Dummy_Intesis.zip
Dummy device can be downloaded for this purpose. To use it with your ETS project follow
these steps:
1) Import the pr3/pr5 file in ETS and follow the instructions
•
ETS3: menu File
•
ETS4: Projects
2) Open the project named Dummy Intesis.
3) In this Dummy Intesis project, in topology tree, you will find the device "Dummy
Intesis". Select this device (click on it) and copy it (menu Edit Copy)
4) Open your target project, select the desired line and paste the device there (menu
Edit Paste).
Once that is done the group addresses can be configured. To do so the same addresses
configured in the LinkBoxBacnet need to be written in the right data type.
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
®
IntesisBox is a registered trademark of Intesis Software SL
and ETS
®
in ETS
®
is configured with the LinkBoxBacnet but in some projects it
Import.
Import projects
User's Manual r18 eng
an ETS project
URL http://www.intesis.com
Email info@intesis.com
tel +34 938047134
containing a
27 / 31