Arbiter Systems 1092A Operation Manual page 2

ii
Description This manual is issued for reference only, at the convenience of Arbiter Systems.
Reasonable effort was made to verify that all contents were accurate as of the time of publication.
Check with Arbiter Systems at the address below for any revisions made since the original date of
publication.
Contact Information
Arbiter Systems, Inc.
1324 Vendels Circle, Suite 121
Paso Robles, CA 93446
(805) 237-3831
Website: www.arbiter.com
mailto: techsupport@arbiter.com
mailto: sales@arbiter.com
What This Manual Covers
This manual describes the set up and operation of the Model 1092A/B/C and Model 1093A/B/C
series satellite-controlled clocks.
How to Determine Firmware Version Date
To display the firmware date for your instrument (Models 1092B, 1093B and 1093C only) press
and release the SETUP key at power-up and the date should appear briefly on the LCD display.
To display the firmware date for Models 1092A, 1092C and 1093A, use the main RS-232 port (see
page 10.2.15). To determine the current firmware date for this product, see the Arbiter website
under the specific product name.
Firmware Updates – Main Board
Clocks with an main board require a ROM change to update firmware. This version of the manual is
written for clocks with a ROM current with the publishing date of this manual (see page v). Where
applicable, this update may include new documentation, such as a new version of this manual.