Bbmd Configuration - IntesisBox KNX TP-1 (EIB) User Manual

®
IntesisBox BACnet/IP Server - KNX
Description Used to import group addresses from ETS files
Values This button let you select the different import methods (Explained in section
6.2)
Description Buttons to move the selected row (or rows) up or down inside the grid. To
move up or down inside the grid a single row or a group of consecutive
rows, just select the row or rows using the left button of the mouse and
push the desired up or down button.
Comments This can be done also using the key combinations ALT+arrow up or
ALT+arrow down instead of up or down buttons
Description Button that adds a row under the selected one.
Description Buttons to delete the selected row (or rows).
Description Save the configuration (details in section 5.1.3)
Description Exits the configuration window (details in section 5.1.3)

5.1.3 BBMD configuration

BBMD functionality is available from firmware version V.41.1.28 and only for versions
V.41.1.x.
When BBMD functionality is enabled, IntesisBox also provides support for Foreign BACnet
Devices with a maximum of 10 devices.
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
®
IntesisBox is a registered trademark of Intesis Software SL
(Import from ETS)
•
Import group Address ... (CSV format: 1/1 tab separated)
•
Import ESF files ...
↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓
Add
Delete
Save
Exit
URL
Email
tel
User's Manual r18 eng
http://www.intesis.com
info@intesis.com
+34 938047134
23 / 31