Table of Contents
Advertisement
®
IntesisBox
BACnet/IP Server - KNX
© Intesis Software S.L.
Information in this document is subject to change without notice. The software described in
this document is furnished under a license agreement or nondisclosure agreement. The
software may be used only in accordance with the terms of those agreements. No part of
this publication may be reproduced, stored in a retrieval system or transmitted in any form
or any means electronic or mechanical, including photocopying and recording for any
purpose other than the purchaser's personal use without the written permission of Intesis
Software S.L.
Intesis Software S.L.
Milà i Fontanals, 1 bis - 1º
08700 Igualada
Spain
TRADEMARKS
All trademarks and tradenames used in this document are acknowledged to be the copyright of their respective holders.
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
®
IntesisBox
is a registered trademark of Intesis Software SL
All Rights Reserved.
URL
Email
tel
User's Manual r18 eng
http://www.intesis.com
info@intesis.com
+34 938047134
2 / 31
Advertisement
Table of Contents
Need help?
Do you have a question about the KNX TP-1 (EIB) and is the answer not in the manual?
Questions and answers