IntesisBox KNX TP-1 (EIB) User Manual page 21

®
IntesisBox BACnet/IP Server - KNX
Description BACnet object name for the signal. This name is included into the BACnet's
Object_name property for the point and it will be collected by any BACnet
explorer. From here a BACnet explorer or supervisor can get the KNX group.
That may help during the gateway's integration phase into the BACnet
system.
Values Same as description
Following the format: TT_AA_LL_CCC D..D where
Comments It changes from one format to the other when changing the value of auto
Bac Name checkbox
Description BACnet object name for the signal. This name is included into the BACnet's
Object_name property for the point and it will be collected by any BACnet
explorer. From here a BACnet explorer or supervisor can get the KNX group.
That may help during the gateway's integration phase into the BACnet
system.
• AI = Analog Input.
Values
• AO = Analog Output.
• AV = Analog Value.
• DI = Digital Input.
• DO = Digital Output.
• DV = Digital Value.
• MI = Multistate Input.
• MO = Multistate Output.
• MV = Multistate Value.
Restrictions When the type is AI, BI or MI the flags R and T are not selectable
Comments Edit using the mouse right-button-click pop-up menu
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
®
IntesisBox is a registered trademark of Intesis Software SL
•
TT = BACnet object type abbreviation (see below).
•
AA = First part of the KNX group address defined for the point.
•
LL = Second part of the KNX group address defined for the point.
•
CCC = Last part of the KNX group address defined for the point.
•
D..D = Point's description entered in column Description.
Bac.Name
Bac.Type
URL
Email
tel
User's Manual r18 eng
http://www.intesis.com
info@intesis.com
+34 938047134
21 / 31