Table of Contents
Advertisement
N2848A QuickTip InfiniiMode Probe Head
The N2848A QuickTip probe head is used with an
N2849A QuickTip and together they provide the
following advantages:
• InfiniiMode on InfiniiMax III+ (N2830/1/2A and
• Easy-to-make secure magnetic mechanical
Figure 53 Magnet Connections in Probe Head
• Extreme temperature environments such as temperature chambers.
Table 15 Bandwidth
Probe Amplifier
N2830A
N2831A
N2832A
Permanently solder any number of QuickTips to your DUT as shown in
on page 66. Because the probe head is magnetically connected (instead of
mechanically connected) to the QuickTip, you can effortlessly connect and
disconnect to each QuickTip. For best performance, position the QuickTip
vertically on the DUT. Because this is an InfiniiMode compatible head, the tip has
two signal leads and two ground leads. To learn about InfiniiMode, refer to
InfiniiMax III+ Series Probes User's Guide
N7000/1/2/3A probe amplifiers). InfiniiMode
allows you to make differential, common mode,
and single ended measurements without having
to re-solder the tip leads.
connection between the probe head and
QuickTip. Three magnets in the head connect the two sides of a differential
signal and a ground. No latch lever is used!
BW
4 GHz
8 GHz
>12 GHz
Using InfiniiMax III+ Probe Heads
Probe Amplifier
BW
N7000A
8 GHz
N7001A
13 GHz
N7002A
16 GHz
N7003A
>16 GHz
2
Figure 54
"To Use
65
Advertisement
Table of Contents
