Compatible Oscilloscopes - Keysight InfiniiMax III+ Series User Manual

Compatible Oscilloscopes

The N2830/1/2A probe's precision BNC AutoProbe I interface connects directly to
S-series and 90000A oscilloscopes. Use an N5442A adapter to connect to series
90000 Q, V, X, and Z-series Infiniium oscilloscopes. Use an N1022B adapter to
connect to the 86100D oscilloscope.
The N7000/1/2/3A probe's AutoProbe II interface connects directly to series
90000 Q, V, X, and Z-series Infiniium oscilloscopes. Use an N5477A adapter to
connect to the 86100D oscilloscope.
The N2830/1/2A and N7000/1/2/3A probes are not compatible with Infiniium
9000 Series, InfiniiVision and any old generation Keysight, Agilent, or HP
oscilloscopes.
Table 2
Oscilloscope
90000 Q, V, X, and Z-Series
90000A Series
S-Series
86100C/D Series
Table 3
Oscilloscope
90000 Q, V, X, Z-Series
86100C/D Series
Is your oscilloscope software up-to-date?
Keysight periodically releases software updates to support your probe, fix known
defects, and incorporate product enhancements. To download the latest firmware,
go to www.Keysight.com and search for your oscilloscope's model number. Click
on the "Drivers, Firmware & Software" tab under the Technical Support link.
86100C/D sampling oscilloscope
The probes can be used with the 86100C/D sampling scope with degraded
performance, depending on the probe head used. Use only in differential 1x mode
(10:1 attenuation). For N2830/1/2A probes, use the N1022B adapter. For
N7000/1/2/3A probes, use the N5477A adapter.
InfiniiMax III+ Series Probes User's Guide
N2830A-Series Probes and Compatible Infiniium Oscilloscopes
N7000A-Series Probes and Compatible Infiniium Oscilloscopes
Using InfiniiMax III+ Series Probes
Adapter Required
N5442A
none
none
N1022A/B
Adapter Required
none
N5477A
Minimum Required Firmware
Version
5.00
5.00
5.00
—
Minimum Required Firmware
Version
5.50
—
1
15