Table of Contents
Advertisement
N5441A InfiniiMax III Solder-In Head
The N5441A InfiniiMax III solder-in
probe head is an economical semi-permanent
connection that provides up to 16 GHz of system
bandwidth. Variable span of the leads ranges from
5 mil to 80 mil (0.127 mm to 2 mm).
The N5441A probe head can be used with the
N5450B InfiniiMax extreme temperature extension
cable. This is the only InfiniiMax III probe head that
can withstand the –55°C to +150°C extreme
temperature range (for up to 250 test cycles).
Table 13 Bandwidth
Probe Amplifier
N2830A
N2831A
N2832A
When using the N5450B extension cable, do not subject the InfiniiMax III probe
CAUTION
amplifier or probe head (other than the N5441A solder-in probe head) to extreme
temperatures.
Replaceable parts
Extra wire (for solder-in probe head only). 01169-81301 (7 mil), 01169-21306
(5 mil)
N OT E
The wires on the N5441A are fragile. They must be manufactured in this way in order
CAUTION
to meet the high-performance, high bandwidth applications they are intended for. Be
careful when handling.
InfiniiMax III+ Series Probes User's Guide
BW
4 GHz
8 GHz
13 GHz
To install or repair N2838A resistor leads, refer to
on page 80.
Wires"
Using InfiniiMax III+ Probe Heads
Probe Amplifier
BW
N7000A
8 GHz
N7001A
13 GHz
N7002A
16 GHz
N7003A
20 GHz
"Replacing N5441A Probe Head
2
57
Advertisement
Table of Contents
