Setting Routing Tables
7-3
Setting Routing Tables
7-3-1
Example Routing Table Settings
Example 1
This section describes routing table settings.
Routing tables are set through the FinsGateway, Controller Link Support Soft-
ware, or CX-Programmer. This section describes setting procedures and set-
ting details.
For specific procedures, see the FinsGateway online help, Controller Link
Support Software Operation Manual (W308,) or CX-Programmer User's Man-
ual.
This section shows examples of routing table settings.
The example below shows local network table settings when a Support Board
is mounted to a computer.
Computer
Unit number b
Controller Link Network address A
Local Network Table
Loc
SIOU
No.
Netwk
unit #
A
b
1
Section 7-3
121