Intended Audience; General Precautions; Safety Precautions - Omron SYSMAC 3G8F7-CLK13-E Operation Manual

Intended Audience

1

Intended Audience

2

General Precautions

!WARNING
3

Safety Precautions

!WARNING
!WARNING
!WARNING
xiv
This manual is intended for the following personnel, who must also have
knowledge of electrical systems (an electrical engineer or the equivalent).
• Personnel in charge of installing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of managing FA systems and facilities.
The user must operate the product according to the performance specifica-
tions described in the operation manuals.
Before using the product under conditions which are not described in the
manual or applying the product to nuclear control systems, railroad systems,
aviation systems, vehicles, combustion systems, medical equipment, amuse-
ment machines, safety equipment, and other systems, machines, and equip-
ment that may have a serious influence on lives and property if used
improperly, consult your OMRON representative.
Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide
the systems, machines, and equipment with double safety mechanisms.
This manual provides information for programming and operating the Control-
ler Link Support Board for PCI Bus and related devices. Be sure to read this
manual before attempting to use the software and keep this manual close at
hand for reference during operation.
It is extremely important that a Controller Link Support Board for PCI Bus and
all related devices be used for the specified purpose and under the specified
conditions, especially in applications that can directly or indirectly affect
human life. You must consult with your OMRON representative before apply-
ing a Controller Link Support Board for PCI Bus to the above mentioned appli-
cations.
Never attempt to disassemble any Controller Link Support Board for PCI Bus
while power is being supplied. Doing so may result in serious electrical shock
or electrocution.
Never touch any of the terminals while power is being supplied. Doing so may
result in serious electrical shock or electrocution.
Provide safety measures in external circuits (i.e., not in the Programmable
Controller), including the following items, to ensure safety in the system if an
abnormality occurs due to malfunction of the Programmable Controller or
another external factor affecting the operation of the Programmable Control-
ler. "Programmable Controller" indicates the CPU Unit and all other Units and
is abbreviated "PLC" in this manual. Not doing so may result in serious acci-
dents.
• Emergency stop circuits, interlock circuits, limit circuits, and similar safety
measures must be provided in external control circuits.
1