Conformance To Ec Directives; Applicable Directives - Omron SYSMAC 3G8F7-CLK13-E Operation Manual

Conformance to EC Directives

6

Conformance to EC Directives

6-1

Applicable Directives

6-2 Applicable Directives
xviii
• Be sure that the communications cable connectors and other items with
locking devices are properly locked into place. Improper locking may
result in malfunction.
• Use a special packing box when transporting the Board. Handle the prod-
uct carefully so that no excessive vibration or impact is applied to the
product during transportation.
• Check the user program for proper execution before actually running it on
the Unit. Not checking the program may result in an unexpected opera-
tion.
• Observe the following precautions when wiring the communications cable
or backup power supply cables.
• Separate the cables from power lines or high-tension lines.
• Do not bend the cables.
• Do not pull on the cables.
• Do not place heavy objects on top of the cables.
• Route cables inside conduits.
• Before touching the Unit, be sure to first touch a grounded metallic object
in order to discharge any static built-up. Not doing so may result in mal-
function or damage.
• Do not touch the Board surfaces or parts.
• Install the Board according to instructions in the operation manuals.
Improper installation may cause faulty operation.
• When using the Optical Ring Controller Link Support Board for public util-
ities systems, such as electricity, gas, or water supply, use the Optical
Ring mode and provide appropriate fail-safe measures.
• EMC Directives
EMC Directives
OMRON devices that comply with EC Directives also conform to the related
EMC standards so that they can be more easily built into other devices or
machines. The actual products have been checked for conformity to EMC
standards (see the following note). Whether the products conform to the stan-
dards in the system used by the customer, however, must be checked by the
customer.
EMC-related performance of the OMRON devices that comply with EC Direc-
tives will vary depending on the configuration, wiring, and other conditions of
the equipment or control panel in which the OMRON devices are installed.
The customer must, therefore, perform final checks to confirm that devices
and the overall machine conform to EMC standards.
Note Applicable EMC (Electromagnetic Compatibility) standards are as follows:
EMS (Electromagnetic Susceptibility):
EMI (Electromagnetic Interference):
EN61000-6-2
EN61000-6-4
6