Omron SYSMAC 3G8F7-CLK13-E Operation Manual page 9

About this Manual:
This manual describes the operation of the 3G8F7-CLK13-E, 3G8F7-CLK12-EV1, 3G8F7-CLK53-E,
3G8F7-CLK52-EV1, 3G8F7-CLK23-E, and 3G8F7-CLK21-EV1 Controller Link Support Boards for PCI
Bus and includes the sections described below. Controller Link Support Boards are used to connect
IBM PC/AT or compatible computers to a Controller Link Network. The following three manuals are
directly related to application of the Controller Link Network.
Name
3G8F7-CLK13-E, 3G8F7-CLK12-
EV1, 3G8F7-CLK53-E, 3G8F7-
CLK52-EV1, 3G8F7-CLK23-E,
3G8F7-CLK21-EV1
Controller Link Support Boards for
PCI Bus
Operation Manual (this manual)
3G8F7-CLK13-E, 3G8F7-CLK12-
EV1, 3G8F7-CLK53-E, 3G8F7-
CLK52-EV1, 3G8F7-CLK23-E,
3G8F7-CLK21-EV1
Controller Link Support Boards for
PCI Bus
Installation Guide
3G8F5-CLK11-E, 3G8F5-CLK21-E
Controller Link Support Boards for
ISA Bus
Operation Manual
C200HW-ZW3AT2-E-V2
Controller Link Support Software
Operation Manual
CS1W-CLK23, CS1W-CLK21-V1,
CJ1W-CLK23, CJ1W-CLK21-V1,
C200HW-CLK21,CVM1-CLK21,
CQM1H-CLK21
Controller Link Units (Wired and
Optical) Operation Manual
CS1W-CLK13, CS1W-CLK12-V1,
CVM1-CLK12, CS1W-CLK53,
CS1W-CLK52-V1, CVM1-CLK52
Optical Ring Controller Link Units
Operation Manual
Contents
Operating procedures for Controller Link Support
Boards for PCI bus connections. Controller Link Sup-
port Boards are used to connect IBM PC/ATs or com-
patibles to a Controller Link Network.
Installation and setup procedures for Controller Link
Support Boards for PCI bus connections. Controller
Link Support Boards are used to connect IBM PC/ATs
or compatibles to a Controller Link Network.
Installation, setup, and operating procedures for Con-
troller Link Support Boards for ISA bus connections.
Controller Link Support Boards are used to connect
IBM PC/ATs or compatibles to a Controller Link Net-
work.
Installation and operating procedures for the Control-
ler Link Support Software. The Controller Link Sup-
port Software enables manually set data links and
other procedures for a Controller Link Network.
Installation, setup, and operating procedures for the
Optical and Wired Controller Link Units. Controller
Link Units are used to connect C200HX/HG/HE, CV-
series, and CS1-series PLCs to a Controller Link Net-
work.
Installation, setup, and operating procedures for the
Optical Ring Controller Link Units. Controller Link
Units are used to connect C200HX/HG/HE CV-series,
and CS1-series PLCs to a Controller Link Network.
Cat. No.
(suffixes omitted)
W383
W467
W307
W369
W309
W370
ix