Omron SYSMAC 3G8F7-CLK13-E Operation Manual page 10

Depending on the system, you may also need the SYSMAC or CV Support Software or a Program-
ming Console. Please read this manual and related manuals carefully and be sure you understand the
information provided before attempting to install and operate a Controller Link Support Board.
Section 1 outlines the functions of the Controller Link Support Board, including applications, and the
differences between the Controller Link Support Board and the Controller Link Unit.
Section 2 describes how to wire the power supply cables and communications cables to the Controller
Link Support Board.
Section 3 describes creating applications (user programs) that control the Controller Link Support
Board.
Section 4 details the C-language library functions supported by the Controller Link Support Board.
Section 5 describes how to use data links in a Controller Link Network.
Section 6 explains how to use the message service provided by a Controller Link Support Board.
Section 7 describes the method used to connect multiple networks.
Section 8 explains details on Controller Link Network communications. Refer to this section for net-
work communications that require accurate communications timing.
Section 9 provides information on troubleshooting errors that occur during Controller Link Support
Board operation, as well as daily inspection, cleaning, and other maintenance procedures.
The Appendix provides a list of standard models.
!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
x
About this Manual, Continued