GRAPHTEC midi LOGGER GL800 User Manual page 74

Operation mode
Free Running
Recording
Replaying
To cancel key lock by password
A password can be set to GL800 to cancel the key lock.
(No password is set at factory default.)
<Operation flow>
1. Set the password.
2. Set the key lock.
Hold down the and
3. Cancel the key lock.
Hold down the and
The password setting screen shown below will be displayed. Set a password.
Entering an incorrect password will not cancel key lock.
Key lock state will be retained when power is turned off.
Content
SAMPLE
ZONE
ZONE
SEARCH
ZONE
Press the , , and ENTER keys at the same time to display the
password setting screen shown below. Specify a 4 digit password.
Use the , , , keys to select numbers. Press the ENTER key to
confirm the password.
Specifying 0000 will disable password operation.
In case you forgot your password, please contact us to acquire the
master password.
keys together for at least two seconds.
keys together again for at least two seconds.
Explanation
Left/right key can be used to change the sampling interval.
Left/right key can be used to change the zone division.
Left/right key can be used to change the zone division.
Left/right key can be used to perform search.
Left: Searches past side
Right: Searches future side
Left/right key can be used to change the zone division.
Settings and Measurement
3-37