GRAPHTEC midi LOGGER GL800 User Manual page 63

Settings and Measurement
About the Macro
Interface commands for GL800 can be described in a text file and read in. GL800 will operate as
described in this file.
<Macro operation flow>
Macro description example (file name: xxx.GMA)
CAUTION
Refer to the "Interface Command Table" for details on commands supported by GL800 on a separate
sheet.
The "Interface Command Table" is included in the CD.
Supported commands are limited to those relative to GL800 settings.
Read in commands cannot be used.
3-26
• Setting condition switch: Switches between Guest, User 1 and User 2.
Since setting conditions are stored for each user, they can be called
up easily by simply switching the user.
• Macro file name: Specify the macro file name to be executed.
• Macro run: Executes the specified macro file.
Create a macro file using a text editor on your PC
(save the file with extension "GMA").
Copy this file to a USB memory, and then connect
the USB memory to GL800.
Select the macro file and run the file.
・Macro file name:
・Execute Macro:
GL800 executes the commands
as described in the macro file.