Technical Specifications - Comnet CNGE2+2SMS Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL

Technical Specifications

Technology
Ethernet Standards
Software Features
Interface
SFP
RJ45 Ports
LED Indicators
Power Requirements
Power Input Voltage
Current Draw
Reverse Polarity Protection Present (On Terminal Block of Non-PoE Models Only)
Environmental
Operating Temperature
Storage Temperature
Operating Humidity
TECH SUPPORT: 1.888.678.9427
IEEE 802.3 for 10BASE-T
IEEE 802.3u for 100BASE-TX and 100BASE-FX
IEEE 802.3z for 1000BASE-X
IEEE 802.3ab for 1000BASE-T
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at for Power Sourcing Equipment (PSE) and PoE (≤ 30 W per port)
IEEE 802.3x Flow Control and Back Pressure
RSTP (IEEE 802.1D/w)
Port Configuration, Status, Statistics, Security
PoE Configuration, Status, Health Check
SNMP
Enable/Disable Ports
Port Guardian Physical Port Lockout
IGMP Snooping v2
SNMP Trap
LLDP
Static Multicast MAC Routing
Static MAC Lock Security
Active Ping Check with SNMP Trap, Port Reset & Port Shutdown capability
2 × 100/1000Base-X SFP
2 × 10/100/1000Base-T(X), Auto MDI/MDIX
Per Unit : Power × 2 (Green)
RJ45 Ports:
Per Port : Link/Activity(Green/Blinking Green), 1000 Mbps indicator (Amber)
SFP Ports:
Per Port : Link/Activity(Green/Blinking Green)
Dual 48 to 57 VDC PoE, 9 to 36 VDC
or 24 VAC non PoE
3.5A max, with PoE, 1A w/out PoE
-40 to +75 ºC
-40 to +85 ºC
5% to 95%, non-condensing
CNGE2+2SMS[POE][HO]
INS_CNGE2+2SMS_REV– 02/19/13 PAGE 52