Command Line Interface Management; Configuration By Command Line Interface (Cli) - Comnet CNGE2+2SMS Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL CNGE2+2SMS[POE][HO]

Command Line Interface Management

Configuration by Command Line Interface (CLI).

About CLI Management
Besides WEB-base management, the CNGE2+2SMS also supports CLI management for network
configuration. You can use USB console to manage the switch by CLI.
CLI Management by USB Console (115200, 8, none, 1, none)
Before configuring by USB console, use a USB mini B cable to connect the switch's Console port
to your PC's USB port.
Follow the steps below to access the console via USB mini B cable.
Step 1. Connect the USB cable between the PC and the CNGE2+2SMS. If the device driver is not
found, the product CD includes the windows .inf driver.
Step 2. From the Windows desktop, select on Start -> Tera Term
TECH SUPPORT: 1.888.678.9427
INS_CNGE2+2SMS_REV– 02/19/13 PAGE 48