Overview; Introduction; Software Features - Comnet CNGE2+2SMS Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL

Overview

Introduction

The CNGE2+2SMS is a light managed, hardened Ethernet switch that contains many features.
The switch will work under a wide variety of temperature, dirty and humid conditions. It can be
managed through WEB, USB Console or other third-party SNMP software. With the easy to use
and intuitive web and CLI interfaces, the switch can be easily monitored by a utility called eVision,
which is part of the ComNet eConsole software suite.
eConsole is network management software that is very effective. With easy to use and intuitive
interface, you can easily monitor the status of the switches.

Software Features

» Supports SNMPv1/v2c
» Event notification by SNMP trap and Relay Output (Relay Output for PoE models only)
» Web-based GUI and USB Console CLI configuration
» Enable/disable ports
» LLDP (Link Layer Discovery Protocol) support (802.1AB)
» PoE status monitoring and health check
» RSTP (802.1w)
» IGMP snooping v2 (64 groups)
» Jumbo Frame support (10240 MTU)
» Static MAC lock (per port)
» Static multicast MAC routing
» Field firmware upgrade capable
» Port Guardian physical port lockout feature
» Active ping check with SNMP trap, port reset & port shutdown capability
TECH SUPPORT: 1.888.678.9427
CNGE2+2SMS[POE][HO]
INS_CNGE2+2SMS_REV– 02/19/13 PAGE 5