INSTALLATION AND OPERATION MANUAL
SNMP
Simple Network Management Protocol (SNMP) is the protocol developed to manage nodes
(servers, workstations, routers, switches and hubs etc.) on an IP network. SNMP enables network
administrators to manage network performance, find and solve network problems, and plan for
network growth. Network management systems learn of problems by receiving traps or change
notices from network devices implementing SNMP.
SNMP – Config
The following table describes the labels in this screen.
Label
SNMP V1/V2c Community
SNMP trap enable
Manager IP address
Apply
Help
TECH SUPPORT: 1.888.678.9427
SNMP Community Configuration interface
Description
The switch supports one Read and one Write SNMP community string.
Community string names are limited to 8 characters.
To disable a community string leave its entry blank.
Enable SNMP traps to be sent to the manager
IP address of the management software
Select Apply to activate the configurations.
Show help file.
CNGE2+2SMS[POE][HO]
INS_CNGE2+2SMS_REV– 02/19/13 PAGE 38