Static Mac Lock Configuration - Comnet CNGE2+2SMS Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL

Static MAC Lock Configuration

Label
Enable
MAC Addr.
Port Number
Apply
Help
Important Note: RSTP cannot be used in conjunction with the Static MAC Lock feature.
A system reset must be performed after making changes to the static MAC lock
settings.
TECH SUPPORT: 1.888.678.9427
Static MAC Lock Configuration interface
Description
Enable static MAC locking
MAC address of the device that is allowed to forward and receive traffic.
Packets will be dropped for MAC addresses not listed in the table
Ports to be included in the locked list
Select Apply to activate the configurations.
Show help file.
CNGE2+2SMS[POE][HO]
INS_CNGE2+2SMS_REV– 02/19/13 PAGE 44