Port Guardian - Cli Reset - Comnet CNGE2+2SMS Installation And Operation Manual

INSTALLATION AND OPERATION MANUAL
Port Guardian – CLI Reset
The Port Guardian feature can be cleared from the USB serial port connection on the unit through
the CLI and also the port status can be displayed to show any ports that are in lock out state.
To access the Port Guardian CLI commands connect to the CLI using the procedure described in the
Command Line Interface Management section on page 48 and then use the commands described
below.
Command
portguardian show
Command
portguardian clear
TECH SUPPORT: 1.888.678.9427
Description
Will display any ports that are currently in port lockout fault state.
Description
Will clear any ports that were previously in port lockout fault state.
CNGE2+2SMS[POE][HO]
INS_CNGE2+2SMS_REV– 02/19/13 PAGE 42