Problems
• The connection setting data cannot be transferred
Data Transmission Screen
Synchronization Window
Transfer to Controller Dialog
Box
EtherNet/IP Connection Set-
ting Tab Page
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
The Sysmac Studio displays the following error message and the data will
not be transferred.
The Sysmac Studio displays the following error dialog box and the data will
not be transferred.
The Transfer to Controller and Transfer from Controller Buttons are
grayed out and the data cannot be transferred/compared.
Appendices
Problem
A
A-39