Omron Sysmac NJ-series User Manual page 26

Versions
Unit Versions of CPU Units and Sysmac Studio Versions
The functions that are supported depend on the unit version of the NJ/NX-series CPU Unit. The version
of Sysmac Studio that supports the functions that were added for an upgrade is also required to use
those functions.
Refer to the NJ/NX-series CPU Unit Software User's Manual (Cat. No. W501) for the relationship
between the unit versions of the CPU Units and the Sysmac Studio versions, and for the functions that
are supported by each unit version.
Unit Versions of CPU Units and Peripheral Tool Versions
When you set tag data links for the built-in EtherNet/IP port on an NJ/NX-series CPU Unit, use the ver-
sions of the Network Configurator and the Sysmac Studio that are given in the following table.
CPU Unit
Version
Model Version 3.3x or
lower
NJ501- Version 1.00 NA
 to 1.02
NJ301- Version 1.01 NA
or 1.02

NJ501- Version 1.03 NA
or later

NJ301-

NJ101- Version 1.10 NA
or later

NX701-

NX1P2- Version 1.13 NA
or later

24
Network Configurator for EtherNet/IP
Version Version
Version
3.50 or 3.53 to
3.40
3.51 3.58
OK OK OK
NA OK OK
NA NA OK
NA NA NA
NA NA NA
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Version Version Version
3.59 to 3.61 or 1.09 or
3.60 higher lower
OK OK NA
OK OK NA
OK OK NA
OK OK NA
NA OK NA
Sysmac Studio
Version Version Version
1.10 to 1.13 to 1.17 or
1.12 1.16 higher
OK OK OK
OK OK OK
OK OK OK
NA OK OK
NA NA OK