Ftp Client; Using The Ftp Client To Transfer Files; Transferring Files - Omron Sysmac NJ-series User Manual

11 FTP Client

11-1 Using the FTP Client to Transfer Files

You can use the FTP client to transfer files between the FTP client and an FTP server. You can transfer
files in either direction: download data from the FTP server to the FTP client or upload data from the
FTP client to the FTP server.
Version Information
A CPU Unit with unit version 1.08 or later is required to use the FTP client.

11-1-1 Transferring Files

All file transfers that use the FTP client are executed with FTP client communications instructions in the
user program. The file transfer settings are all made with the parameters of the FTP client communica-
tions instructions. No settings are required from the Sysmac Studio.
The FTP client communications instructions and their functions are given in the following table. You can
execute up to three FTP client communications instructions at the same time.
Instruction
FTPGetFileList
FTPGetFile
FTPPutFile
FTPRemoveFile
FTPRemoveDir
Downloaded files are stored on the SD Memory Card. When uploading files, files that are stored on the
SD Memory Card are uploaded to the FTP server. Therefore, to upload or download files, an SD Mem-
ory Card must be inserted in the NJ/NX-series CPU Unit.
FTP server
Uploading and downloading files are executed
with FTP client communications instructions.
File
File on SD Memory Card
in CPU Unit
11-2
Function
Gets a file list from the FTP server.
Downloads one or more files from the FTP server.
Uploads one or more files to the FTP server.
Deletes one or more files on the FTP server.
Deletes a directory on the FTP server.
Downloading
Uploading
FTP client
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Ethernet
Built-in EtherNet/IP Port