Omron Sysmac NJ-series User Manual page 197

 Editing Settings for Individual Connections
You can edit each connection separately.
Note Refer to the following section for information on how to perform batch editing in a table format.
1
Click the Connections Tab and then click the New Button. The following Edit Connection Dia-
log Box is displayed according to the type of device that is selected.
Using Built-in EtherNet/IP Ports as Targets (for Input Only)
Using Other EtherNet/IP Devices as Targets (for Settings Other Than Input
Only)
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
7 Tag Data Link Functions
7
7-37