Omron Sysmac NJ-series User Manual page 452

Machine automation controller cpu unit built-in ethernet/iptm port
Hide thumbs Also See for Sysmac NJ-series:
Table of Contents

Advertisement

15 Troubleshooting
Event code
Event name
84010000 hex
IP Address
Duplication
Error
84020000 hex
BOOTP
Server Con-
nection Error
04210000 hex
Communica-
(Ver. 1.10 or
tions Control-
later)
ler Failure
14210000 hex
Identity Error
14230000 hex
MAC
(Ver. 1.10 or
Address
later)
Error
34200000 hex
Tag Data Link
Setting Error
34230000 hex
IP Route
Table Setting
Error
34240000 hex
FTP Server
Setting Error
34250000 hex
NTP Client
Setting Error
34260000 hex
SNMP Set-
ting Error
15-14
Meaning
Assumed cause
The same IP
• The IP address of the built-in
address is used
EtherNet/IP port is also used as
more than once.
the IP address of another node.
Connection with the
• Server setting error
BOOTP server
• Server is down.
failed.
• An error occurred in the com-
munications path.
A hardware error
• Hardware error in the communi-
was detected in the
cations controller
communications
controller of the
built-in EtherNet/IP
port.
The CIP identity
• Non-volatile memory failure
information in non-
volatile memory
was not read cor-
rectly.
The MAC address
• Non-volatile memory failure
in non-volatile
memory was not
read correctly.
An error was
• Power was interrupted when a
detected in the
download was in progress for
communications
the data link settings.
settings for tag data
• Memory error
links.
An IP routing set-
• Setting error
ting error was
• Power was interrupted when a
detected.
download was in progress for
the built-in EtherNet/IP port set-
tings.
• Memory error
An error was
• Setting error
detected in the FTP
• Power was interrupted when a
server settings.
download was in progress for
the FTP server settings.
• Memory error
An error was
• Setting error
detected in the NTP
• Power was interrupted when a
client settings.
download was in progress for
the NTP client settings.
• Memory error
An error was
• Setting error
detected in the
• Power was interrupted when a
SNMP agent/trap
download was in progress for
settings.
the SNMP agent/trap settings.
• Memory error
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Level
Maj
Prt
Min
Obs Info
S
page 15-23
S
page 15-24
S
page 15-24
S
page 15-25
S
page 15-25
S
page 15-26
S
page 15-27
S
page 15-28
S
page 15-29
S
page 15-30
Reference

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sysmac nx-seriesSysmac nx1p2-10 seriesSysmac nx1p2-90 seriesSysmac nj501-5 seriesSysmac nj501-4 seriesSysmac nj501-3 series ... Show all

Table of Contents