Omron Sysmac NJ-series User Manual page 486

15 Troubleshooting
Event name Restarting Ethernet Port
Meaning The built-in EtherNet/IP port was restarted.
Source EtherNet/IP Function Module
Error attributes Level
Effects User program
Indicators EtherNet/IP NET RUN
---
System-defined Variable
variables
None
Cause and Assumed cause
correction
The built-in EtherNet/IP port was
restarted.
Attached None
information
Precautions/ None
Remarks
*1 This applies to an NJ-series CPU Unit.
*2 This applies to an NX-series CPU Unit.
Event name Tag Data Link All Run
Meaning Tag data link connections to all nodes have been established.
Source EtherNet/IP Function Module
Error attributes Level
Effects User program
Indicators EtherNet/IP NET RUN
Lights.
System-defined Variable
variables
_EIP_TDLinkAllRunSta
_EIP1_TDLinkAllRunSta
_EIP2_TDLinkAllRunSta
Cause and Assumed cause
correction
Tag data link connections to all target
nodes have been established.
Attached None
information
Precautions/ None
Remarks
*1 This applies to an NJ-series CPU Unit.
*2 This applies to an NX-series CPU Unit.
15-48
Source details
Information Recovery
Continues. Operation
EtherNet/IP NET ERR
---
Data type
---
Correction
---
Source details
Information Recovery
Continues. Operation
EtherNet/IP NET ERR
---
Data type
*1 BOOL
*2 BOOL
BOOL
*2
Correction
---
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Event code 94060000 hex
Communications Detection
*1 timing
port, communi-
*2
cations port 1,
or Communica-
*2
tions port 2
--- Log category
Not affected.
EtherNet/IP LINK/ACT
---
Name
---
Prevention
---
Event code 94070000 hex
*1 *2 Detection
CIP, CIP1, or
timing
*2
CIP2
--- Log category
Not affected.
EtherNet/IP LINK/ACT
---
Name
All Tag Data Link Communications
Status
CIP Communications1 All Tag Data
Link Communications Status
CIP Communications2 All Tag Data
Link Communications Status
Prevention
---
At user operation
Access
When establish-
ing tag data link
connection
System