Omron Sysmac NJ-series User Manual page 28

Related Manuals
Manual name Cat. No.
NJ/NX-series W508
Motion Control Instruc-
tions Reference Manual
NJ/NX-series W505
CPU Unit
Built-in EtherCAT Port
User's Manual
NJ/NX-series W506
CPU Unit

Port
Built-in EtherNet/IP
User's Manual
NJ-series W528
SECS/GEM CPU Units
User's Manual
NJ-series NJ Robotics W539
CPU Unit User's Manual
NJ/NX-series W503
Troubleshooting Manual
Sysmac Studio Version 1 W504
Operation Manual
26
Model numbers Application
NX701- Learning about the specifi-
NX1P2- cations of the motion control
NJ501- instructions.
NJ301-
NJ101-
NX701- Using the built-in EtherCAT
NX1P2- port on an NJ/NX-series
NJ501- CPU Unit.
NJ301-
NJ101-
NX701- Using the built-in Ether-
NX1P2- Net/IP port on an NJ/NX-
NJ501- series CPU Unit.
NJ301-
NJ101-
NJ501-1340 Using the GEM Services
with NJ-series Controllers.
NJ501-4 Controlling robots with NJ-
series CPU Units.
NX701- Learning about the errors
NX1P2- that may be detected in an
NJ501- NJ/NX-series Controller.
NJ301-
NJ101-
SYSMAC Learning about the operat-
-SE2 ing procedures and func-
tions of the Sysmac Studio.
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Description
The motion control instructions are described.
Information on the built-in EtherCAT port is pro-
vided.
This manual provides an introduction and provides
information on the configuration, features, and
setup.
Information on the built-in EtherNet/IP port is pro-
vided.
Information is provided on the basic setup, tag
data links, and other features.
Provides information on the GEM Services.
Describes the functionality to control robots.
Concepts on managing errors that may be
detected in an NJ/NX-series Controller and infor-
mation on individual errors are described.
Describes the operating procedures of the Sysmac
Studio.