Ippc 1960Tp2E-Ac Rear Bottom; Ippc 1960Tp2E-Ac Rear Top - Nexcom IPPC 1560T Series User Manual

Chapter 1: Product Introduction

IPPC 1960TP2E-AC Rear Top

COM4
COM5
COM6
GPIO DIO

IPPC 1960TP2E-AC Rear Bottom

PS/2
KB/MS
AC
Input
Power & COM1~3
Reset Switch
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
Fieldbus (Special Kit) 2.5 HDD
Drive Bay
LPT
LAN & USB Audio Connectors
VGA
COM 4 to COM 6
These COM ports support RS232 compatible serial devices.
COM 4 supports 5V, 12V or RI by selection.
GPIO
The GPIO connector supports 4 digital input and 4 digital output.
DIO
The GPIO connector supports 4 digital input and 4 digital output with
2.5kV isolated protection.
LPT
Parallel port used to connect LPT devices.
Fieldbus (Special Kit)
Expansion slot for add-on fieldbus modules.
2.5" HDD/SDD Drive Bay
Used to install a 2.5" HDD/SSD.
Power Switch
Press to power-on or power-off the system.
Reset Switch
Press this button to restart the system.
AC Input
Used to plug an AC power cord.
PS/2 KB/MS
Used to connect a PS/2 keyboard and a PS/2 mouse.
18
IPPC 1560T/1960T/2160P Series and APPC 1560T User Manual