Nexcom IPPC 1560T Series User Manual page 136

Chapter 4: BIOS Setup
LCD Control
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset
LCD Control
Primary IGFX Boot Display [CRT]
Secondary IGFX Boot Display [LVDS]
Active LFP [Int-LVDS]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Primary IGFX Boot Display
Select the video device which will be activated during POST. Has no effect
if external graphics is present. Secondary boot display selection will appear
based on your selection. VGA modes will be supported only on primary
display.
Secondary IGFX Boot Display
Select the secondary display device.
Active LFP
Select the Active LFP configuration.
No LVDS VBIOS does not enable LVDS.
Int-LVDS VBIOS enables LVDS driver by Integrated encoder.
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
NB PCIe Configuration
This section is used to configure Northbridge PCI Express settings.
Select the Video Device which
will be activated during POST.
This has no effect if external
graphics present. Secondary boot
display selection will appear
based on your selection.
VGA modes will be supported
only on primary display
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PEG0 - Gen X
Configure PEG0 B0:D1:F0 Gen1-Gen3.
PEG1 - Gen X
Configure PEG1 B0:D1:F1 Gen1-Gen3.
Enable PEG
Enables or disables the PEG slot.
118
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
NB PCIe Configuration
PEG0 Not Present
PEG0 - Gen X [Auto]
PEG1 x1 Gen1
PEG1 - Gen X [Auto]
Enable PEG [Enabled]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Configure PEG0 B0:D1:F0
Gen1-Gen3
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
IPPC 1560T/1960T/2160P Series and APPC 1560T User Manual