Chapter 3: System Setup; Removing The Bottom Chassis Cover - Nexcom ISA 140 User Manual

Chapter 3: System Setup

C 3: s
haPter ystem

Removing the Bottom Chassis Cover

Prior to removing the chassis cover, make sure the unit's power
CAUTION! CAUTION!
CAUTION! is off and disconnected from the power sources to prevent
electric shock or system damage.
1. The screws on the bottom cover are used to secure the cover to the
chassis. Remove these screws and put them in a safe place for later use.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
15
2. With the screws removed, lift up the cover and remove it from the chassis.
ISA 140 User Manual