Specifications - Nexcom IPPC 1560T Series User Manual

Chapter 1: Product Introduction

Specifications

System
▪ CPU: Support 2nd/3rd gen. Intel
– Intel ® Core™ i7-3520ME (2 x 2.9GHz, 4M cache, Max. TDP 35W)
– Intel Core™ i5-3610ME (2 x 2.7GHz, 3M cache, Max. TDP 35W)
®
(Default)
– Intel Core™ i3-3120ME (2 x 2.4GHz, 3M cache, Max. TDP 35W)
®
– Intel Celeron B810 (2 x 1.6GHz, 2M cache, Max. TDP 35W)
® ®
– Intel Pentium B950 (2 x 2.1GHz, 2M cache, Max. TDP 35W)
® ®
▪ BIOS: AMI BIOS
▪ System chipset: Intel
® HM76 Express chipset
▪ System memory: 1x 204-pin DDR3 SO-DIMM socket, 4G DDR3 (default),
support up to 8GB DDR3-1066/1333, non-ECC and un-buffered
▪ Storage Device:
– 1x external locked CFast socket
– 2x hard drive bay: optional 2x 2.5" SATA HDD
▪ Watchdog timer: Watchdog timeout can be programmed by software
from 1 second to 255 seconds and from 1 minute to 255 minutes
(Tolerance 15% under room temperature 25°C)
▪ H/W status monitor: Monitoring system temperature, and voltage
▪ Expansion:
– 2x Mini-PCIe sockets (support optional Wi-Fi or 3.5G module)
– 2x expansion slots for add-on PCI or/and PCIe cards
– 1x PCI and 1x PCIe x4 slots (default)
– 2x PCIe x4 slots
– 2x PCI slots
▪ Panel backlight control button: increase brightness/decrease brightness/
backlight on/off (for IPPC 1960TP2E-AC only)
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
Core™ processor family, rPGA 988
®
Rear I/O
For All
▪ 2x PS2 keyboard/mouse
▪ 2nd display VGA port: 1x DB15
▪ Ethernet: 2x RJ45
▪ USB: 5x USB 2.0 (1 in front)
▪ Audio port: 1x Line-out; 1x Line-in; 1x MIC-in
For IPPC 1960TP2E-DC only
▪ COM #1: RS232/422/485 w/ RI or 5V or 12V selection
▪ COM #2: RS232/422/485 w/ RI or 5V or 12V selection
▪ COM #3: RS232 w/ RI or 5V or 12V selection
▪ ATX power switch
▪ Reset button
For IPPC 1960TP2E-AC only
▪ COM #1: RS232/422/485 w/ 2.5kv isolated protection
▪ COM #2: RS232/422/485 w/ 2.5kv isolated protection
▪ COM #3: RS232 w/ RI or 5V or 12V selection
▪ COM #4: RS232 w/ RI or 5V or 12V selection
▪ COM #5: RS232
▪ COM #6: RS232
▪ DIO w/ 2.5kv isolated protection:
4x digital input (source type)
– Input voltage (dry contact): Logic 0: Close to GND
Logic 1: open
– Input voltage: Logic 0: 3V max.
Logic 1: +5 to 30V
4x digital output (sink type)
– Output voltage: +3.6 to 5V
– Sink current: 200mA max. per channel
5
IPPC 1560T/1960T/2160P Series and APPC 1560T User Manual