Nexcom IPPC 1560T Series User Manual page 125

Chapter 4: BIOS Setup
SATA Mode Selection
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Controller(s) [Enabled]
SATA Mode Selection [IDE]
Serial ATA Port 0 Empty
Software Preserve Unknown
Serial ATA Port 1 Empty
Software Preserve Unknown
Serial ATA Port 2 8GB SATA Flash (8.0GB
Software Preserve SUPPORTED
Serial ATA Port 3 Empty
Software Preserve SATA Mode Selection Unknown
IDE
AHCI
RAID
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Configures the SATA as IDE, AHCI or RAID mode.
IDE This option configures the Serial ATA drives as Parallel ATA
physical storage device.
RAID This option allows you to create RAID or Intel Matrix Storage
configuration on Serial ATA devices.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
USB Configuration
This section is used to configure the USB.
Determines how SATA
controller(s) operate.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Legacy USB Support
Enable Enables Legacy USB.
Auto
Disable Keeps USB devices available only for EFI applications.
Port 60/64 Emulation
Enables I/O port 60h/64h emulation support. This should be enabled for
complete USB keyboard legacy support for non-USB aware OSes.
107
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
USB Configuration
USB Devices:
2 Keyboards, 1 Point
Legacy USB Support [Enabled]
Port 60/64 Emulation [Enabled]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Disables support for Legacy when no USB devices are connected.
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
IPPC 1560T/1960T/2160P Series and APPC 1560T User Manual