Nexcom IPPC 1560T Series User Manual page 130

Chapter 4: BIOS Setup
Serial Port 5 Configuration
This section is used to configure serial port 5.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Serial Port 5 Configuration
Serial Port [Enabled]
Device Settings IO=2E0h; IRQ=10;
Change Settings [Auto]
Device Mode [Disable IR1 function]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Device Mode
Configures the operating mode of the serial port.
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
Parallel Port Configuration
This section is used to configure the parallel port.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Parallel Port
Enables or disables the parallel port.
Change Settings
Selects an optimal setting for the Super IO device.
Device Mode
Configures the operating mode of the parallel port.
112
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Parallel Port Configuration
Parallel Port [Enabled]
Device Settings IO=378h; IRQ=5;
Change Settings [Auto]
Device Mode [STD Printer Mode]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Enable or Disable Parallel Port
(LPT/LPTE)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
IPPC 1560T/1960T/2160P Series and APPC 1560T User Manual