Installing Memory Module - Siemens SIMATIC IPC347E Operating Instructions Manual

Device maintenance
6.4 Removing and installing hardware components
6.4.2

Installing memory module

Dual channel memory
The motherboard provides two DDR3 memory sockets and supports dual channel technology.
The memory capacity of the device can be upgraded to a maximum of 16 GB. You can use
approximately 3.2 GB of this memory in a 32-bit operating system and much more in a 64-bit
operating system.
The table below shows the supported memory types of motherboard.
Module type
DDR3‐SDRAM
DDR3‐SDRAM
DDR3‐SDRAM
To install the memory module
• Only install memory modules designed for the default motherboard.
• Recommend to select
• Unplug the power cord from the power outlet before installing Memory Module.
• A memory module can be installed only when the direction is correct. Switch the
• DDR2 and DDR3 memory modules are not compatible. Please
54
Module Size
8GB
4GB
2GB
WARNING
memory modules with the same brand, capacity, speed, and chips if you use
multiple Memory Modules.
direction if the memory cannot able to be inserted into the memory socket.
make sure to install DDR3 Memory Module on this motherboard.
Description
DDR3-1600 1024M x 64 UDIMM 240pin
DDR3-1600 512M x 64 UDIMM 240pin
DDR3-1600 256M x 64 UDIMM 240pin
Operating Instructions, 09/2018, A5E41134132-AE
SIMATIC IPC347E