Advanced Setup - Siemens SIMATIC IPC347E Operating Instructions Manual

Appendix BIOS
B.3 Advanced setup
B.3

Advanced setup

Advanced Page
Select Advanced from the BIOS setup page to enter the Advanced BIOS setup page. The
advanced page is shown as below.
PCI Subsystem Settings
In PCI Subsystem Setting page, you can view and configure PIC, PCI-X and PCI Express
parameters.
S5 RTC wake settings
In S5 RTC wake settings page, you can enable or disable system to wake from S5 using
RTC alarm.
NOTICE
You cannot set both of the Wake system with Fixed Time and Wake system with Dynamic
Time as Enabled at the same time.
Wake system with Fixed Time
Follow the below instructions to enable system wake on alarm event at a specific time.
1. Select the Wake system with Fixed Time with the arrow keys and press Enter key.
2. Select Enabled and press Enter key in the active window pop-up.
104
Operating Instructions, 09/2018, A5E41134132-AE
SIMATIC IPC347E