Operator Controls - Siemens SIMATIC IPC347E Operating Instructions Manual

Table of Contents

Advertisement

1.2.2

Operator controls

No mains disconnection
The on/off button and on/off switch do not disconnect the device from the mains.
In the case of damage to the device, connecting cables or improper opening of the device,
there is a risk of fire and electric shock.
Always pull out the power plug when the device is not in use. Disconnect the device from
the network by additional measures, for example, with an isolating switch.
NOTICE
Make sure the disconnect devices main readily operable.
The MAINS plug or an appliance coupler of the apparatus is used as the disconnect device,
the disconnect device shall remain readily operable.
On/off switch
The following figure shows the location of the on/off switch.
On/off button
Note
The on/off button is only effective when the power supply is switched on via the on/off switch
at the rear of the device.
SIMATIC IPC347E
Operating Instructions, 09/2018, A5E41134132-AE
WARNING
On/off switch
Overview
1.2 Design of the device
15

Advertisement

Table of Contents
loading

Table of Contents