Expansion Cards; Notes On The Expansion Cards - Siemens SIMATIC IPC347E Operating Instructions Manual

Installing hardware expansions

5.2 Expansion cards

Procedure
5.2 Expansion cards
5.2.1

Notes on the expansion cards

Note
Expansion card specification
The device is designed for use with modules conforming to PCI specification 2.3 (32-bit; 33
MHz, Rev. 2.3) and PCIe specification 2.0. The dimensions of the cards cannot exceed the
specified dimensions. If the height of the card exceeds the specified dimension, you may
experience contact problems, malfunctions and difficulties with the assembly.
The permitted expansion card dimensions are specified in the section Dimensional drawings
for the installation of expansion cards (Page 73).
Note
The PCI card is limited to 5 V and universal board. The total power consumption of the
modules is not permitted to exceed 75W in total.
42
1. Remove the retaining screws
2. Move the cover in the direction as the
arrow.
3. Lift the cover from the back and
remove it.
Operating Instructions, 09/2018, A5E41134132-AE
①
.
SIMATIC IPC347E