Dimension Drawing For The Use Of Telescopic Rails; Technical Data; General Technical Specifications - Siemens SIMATIC IPC347E Operating Instructions Manual

Technical specifications

7.4 Technical data

7.3.3

Dimension drawing for the use of telescopic rails

Dimensions: mm
T1=Tolerances of ± (0.1mm)/(0.004")
7.4 Technical data
7.4.1

General technical specifications

Note
Applicability of technical specifications
The following technical specifications only apply under the following conditions:
• The default configuration of the device is not changed.
• The device is in good working order.
• The fan cover and filter mat are installed.
• The device is closed.
Dimensions
Weight
Supply voltage (V
74
481 × 177 × 509 (W × H × D in mm)
For detailed information on dimensions, refer to "Dimension draw-
ing of the device (Page 72)".
13.3 up to 17.0 kg; depending on the equipment
) 100 V AC to 240 V AC (-10%, +10%)
N
T1=Tolerances of ± (0.3mm)/(0.01")
Operating Instructions, 09/2018, A5E41134132-AE
SIMATIC IPC347E