General Safety Instructions - Siemens SIMATIC IPC347E Operating Instructions Manual

Table of Contents

Advertisement

Safety instructions

2.2 General safety instructions

2.2
General safety instructions
Fully disconnecting the device from mains voltage
Risk of fire and electric shock
The on/off button and on/off switch do not fully disconnect the device from the main power
supply. If the device is switched off with the on/off switch, there remains a risk of electric
shock and fire hazard, for example, if the device or connection cables are damaged or if the
device is used improperly.
Always completely disconnect the device from the main power supply as follows before
performing work on the device or when the device will not be used over an extended period
of time.
• If the device is not mounted in a control cabinet: Shut down the operating system and
• If the device is mounted in a control cabinet: Shut down the operating system and switch
• Properly connect the device to a protective conductor.
Devices in the control cabinet
Life-threatening voltages are present with an open control cabinet
When you open the control cabinet, some areas or components might be carrying life-
threatening voltages.
If you touch these areas or components, electric shock might kill you.
Switch off the power supply to the cabinet before opening it.
18
WARNING
pull the power plug on the rear of the device.
the AC circuit breaker to "Off".
WARNING
Operating Instructions, 09/2018, A5E41134132-AE
SIMATIC IPC347E

Advertisement

Table of Contents
loading

Table of Contents