Appendix Bios; Bios Getting Started - Siemens SIMATIC IPC347E Operating Instructions Manual

Appendix BIOS

B.1

BIOS getting started

BIOS setup utility: Aptio TSE
The motherboard's BIOS is developed on AMI based code. AMI provides Aptio
Environment (TSE), a test-based basic input and output system as BIOS setup utility. The
purpose of Aptio
Getting BIOS setup
To enter BIOS Setup at startup:
1. Power on the motherboard.
2. Press DELETE or ESC key on your keyboard during the Power - On - Self - Test (POST)
when the SIEMENS logo is shown on screen.
The Aptio
You can access the other setup screens from the main BIOS setup menu, such as
'Advanced' or 'Chipset' menus.
NOTICE
• If DELETE or ESC is not pressed, POST continues its routines.
• If the timing is missed for entering BIOS setup during POST, a system reset is required
BIOS setup menu
The Aptio
setup menu option is described in this manual.
SIMATIC IPC347E
Operating Instructions, 09/2018, A5E41134132-AE
TSE is to empower the user with complete system control at boot.
TM
TSE main BIOS setup menu is displayed.
TM
by one of following methods:
– Press CTRL + ALT + DELETE simultaneously.
– Press the reset button on chassis.
– Press the power button to turn off system then turn it back on.
TSE BIOS setup menu is the first screen that you can navigate. Each BIOS
TM
B
Text Setup
TM
101