Siemens SIMATIC IPC347E Operating Instructions Manual page 99

Step 5: install the Intel management engine software
1. Click Chipset: Intel Management Engine.
2. Click
3. Click Run to allow the computer start the installation.
The system starts to extract file from driver package.
4. Click Run to start the installation.
5. Click Next to continue.
6. Select the check box next to "I accept the terms in the License Agreement." and click
Next to accept License Agreement.
7. Click Next to continue the installation.
8. Click Finish.
Step 6: install USB3.0 onboard interface
1. Click USB3.0 onboard interface: Intel USB xHCI (3.0).
2. Click
3. Click Run to start the installation.
4. Click Next to continue.
5. Click Yes to accept License Agreement.
6. Click Next to confirm the
7. Click Next to continue setup.
8. Check the radio button next to "Yes, I want to restart this computer now." and click Finish
to reboot the computer.
Step 7: install Nuvoton Serial Port
1. Click Serial Port: Nuvoton Serial Port.
2. Click
3. Click Next to continue the installation.
4. Click Install to start the driver installation.
5. Click Finish to confirm the installation.
6. Check the radio button next to "Yes, I want to restart this computer now." and click Finish
to reboot the computer.
SIMATIC IPC347E
Operating Instructions, 09/2018, A5E41134132-AE
to install the driver.
to install the driver.
Readme File Information
to install the Nuvoton Serial Port.
Appendix Motherboard
A.4 Installing drivers
and move on.
99