Siemens SIMATIC IPC347E Operating Instructions Manual page 78

Table of Contents

Advertisement

Technical specifications
7.4 Technical data
Depending on the operating system, you need to install additional software (burner soft-
1
ware) to use the full functionality of the DVD writer.
ances during burning.
Graphics
Graphics memory
Resolutions/frequencies/colors
Graphics controller
1
Interfaces
COM 1/COM 2
COM 3/COM 4 (On motherboard)
VGA
DVI-D
Keyboard
Mouse
USB
USB (On motherboard)
Ethernet
Audio
78
When using a DVD writer, the device should generally be free of mechanical disturb-
VGA's resolution is depends on the monitor.
Micro
Line In
Line Out
Dynamic Video Memory Technology (uses between 32
MB and 1.7 GB RAM)
DVI / VGA up to 1920 x 1200 pixels at 60 Hz, color depth
up to 32 bit/pixels
Intel® HD Graphics, 3D engine (integrated in processor)
RS232/RS485/RS422, 9-pin D-sub plug
RS232, 9-pin header
Connection of an analog monitor
Connection of a digital monitor
PS/2 keyboard connection
PS/2 mouse connection
On the rear panel:
2 x USB 2.0 (500 mA)
2 x USB 3.0 (900 mA)
On the front panel:
2 x USB 2.0 (500 mA)
1 x USB 2.0 vertical (500 mA)
2 x Ethernet interface (RJ45)
Wake on LAN, remote boot supported.
10/100/1000 Mbps
Realtek® ALC887, 5.1 channels, high definition audio codec.
Operating Instructions, 09/2018, A5E41134132-AE
1
SIMATIC IPC347E

Advertisement

Table of Contents
loading

Table of Contents